EasyManua.ls Logo

Viessmann VITOTROL 300A User Manual

Viessmann VITOTROL 300A
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and service
instructions
for contractors
VIESMANN
Vitotrol 300A
Remote control, part no. 7438 364
VITOTROL 300A
5458 093 GB 3/2010
Please keep safe.
Question and Answer IconNeed help?

Do you have a question about the Viessmann VITOTROL 300A and is the answer not in the manual?

Viessmann VITOTROL 300A Specifications

General IconGeneral
TypeRemote Control
ModelVITOTROL 300A
CompatibilityViessmann heating systems
DisplayLCD
ConnectivityWireless
Power SupplyBatteries
FunctionsTemperature control
MountingWall-mounted
RangeUp to 30 meters
FeaturesProgrammable heating schedules

Summary

Safety Instructions

Safety Instructions Explained

Explains hazard symbols and notes used throughout the manual for safety purposes.

Target Group

Identifies qualified personnel required for gas and electrical work and system commissioning.

Regulations

Outlines compliance requirements with accident prevention, environmental protection, and trade association rules.

If You Smell Gas

Details immediate actions to take if gas is detected to prevent explosion risks and injury.

If You Smell Flue Gas

Provides critical steps to prevent poisoning from flue gas leaks and ensure ventilation.

Working on the System

Advises on precautions like gas shut-off, power isolation, and safeguarding against unauthorized reconnection.

Repair Work

Emphasizes using original spare parts to maintain safe operation and avoid compromising safety functions.

Ancillary Components, Spare and Wearing Parts

Warns against using untested or non-authorized parts that could compromise safety and warranty.

Installation Instructions

Installation Sequence

Outlines the logical order of operations required for installing the Vitotrol 300A.

Installation Location

Specifies suitable locations and environmental conditions for installing the remote control unit.

Installing and Connecting the Vitotrol 300A

Provides detailed instructions on the physical installation and electrical wiring of the Vitotrol 300A.

Connecting Several Remote Control Units

Details the procedure for connecting up to two remote control units to a boiler control unit.

Fitting the Programming Unit

Describes the process of correctly attaching the programming unit to the remote control.

Removing the Programming Unit

Explains the procedure for safely detaching the programming unit from the remote control.

Service Instructions

Commissioning

Guides the user through the initial configuration, setup, and language selection of the remote control.

Specification

Lists technical specifications including power supply, protection class, and ambient temperature limits.

Parts List

Provides a comprehensive list of available spare parts with their corresponding part numbers.

Related product manuals