EasyManua.ls Logo

Viessmann VITOTROL 300A - Installation Instructions; Installation Sequence; Installation Location

Viessmann VITOTROL 300A
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
■ Weather-compensated mode
Installation in any room.
■ Operation with room temperature-
dependent control
– On an internal wall in the living
space, at a height of approx. 1.5 m
from the floor
– Not near windows and doors
– Not above radiators
– Not near heat sources (direct sun-
light, fireplace, TV set etc.)
Do not install further controllers in this
room. Open any thermostatic radiator
valves fully.
Note
If the remote control cannot be installed
in a suitable location, connect the room
temperature sensor, part no. 7438 537,
available as an accessory.
Installation sequence
Installation location
5458 093 GB
Installation