Need help?Do you have a question about the Viessmann Vitotrol 200 and is the answer not in the manual?
General| Type | Remote control |
|---|---|
| Compatibility | Viessmann heating systems |
| Display | LCD |
| Mounting | Wall-mounted |
| Dimensions | 120 x 80 x 25 mm |
| Power source | Battery |
| Functions | Temperature control |
| Operating Temperature | 0°C to 40°C |
| Weight | 150 grams |
Key safety and installation requirements for proper and safe operation.
Specifies that only qualified professionals should service the equipment.
Details adjustments like timer cycles, temperatures, heating curves, and programs.
Describes the dial for setting the desired 'normal room temperature'.
Identifies the buttons used to select different operating modes.
Indicates the mode for energy-saving operation.
Shows the indicator light for system faults.
Indicates the mode for continuous heating at normal temperature.
Instructions on setting the temperature using the dial.
Mode for space and hot water heating, often used in winter.
Mode for domestic hot water heating without space heating, for summer use.
Mode for shutting down space and domestic hot water heating.
Steps to enable the economy mode for energy efficiency.
Methods for disabling the economy mode, either automatically or manually.
Instructions to activate party mode for extended heating at normal temperature.
Methods to deactivate party mode, either automatically or manually.
Important note regarding party mode settings on the Vitotronic control unit.
Indicates how system faults are displayed via a flashing red error message.
To Next Page
