Viessmann Manufacturing Company Inc.
750 McMurray Road
Waterloo, Ontario • N2V 2G5 • Canada
Tel. (519) 885-6300 • Fax (519) 885-0887
Viessmann Manufacturing Company (U.S.) Inc.
45 Access Road
Warwick, Rhode Island • 02886 • USA
Tel. (401) 732-0667 • Fax (401) 732-0590
4
Activating the Party Mode
Activate the party mode, if you require space and hot water heating independent
of the set operating mode or timer cycle and for a short period of time.
During the party mode your living area will be heated at “normal room
temperature” set on dial “
”.
You can adjust room temperature (party temperature) according to your personal
preference.
To activate the party mode
1. Set desired party temperature on dial
“
”.
2. Press
, the party button is lit and
will remain lit during party operation.
3. Reset dial “
” to previous value.
Example
If you would like to stay up longer,
when you have guests.
The party mode and the party
temperature can also be set on the
Vitotronic control unit.
During the party mode your living space
will be h eated at the temperature that
was selected with the
or button
on the Vitotronic control unit.
See Operating Instructions of
heating system with Vitotronic
control
To deactivate the party mode
H The party mode deactivates when the
heating system switches
automatically to heating at “normal
room temperature”.
H If you would like to deactivate the
party mode prematurely, press
again, the indicator light will go off.
Diagnosis and Correction
Fault operation of the heating system will be indicated by the flashing red error
message “
” (see “Overview of Operating and Display Elements”).
The fault type can be retrieved
from the Vitotronic control unit.
See Operating Instructions of
heating system with Vitotronic
control.
5167 501
IMPORTANT
Technical information subject to change without notice.
Printed on environmentally friendly
(recycled and recyclable) paper.
To Previous Page
Loading...
