Quick Reference Guide
Vitotronic 200, Part No. Z001 230
Boiler temperature
5285 235 v1.1 09/2007
The Vitotronic 200 Quick Reference Guide is an introduction to the basic functions and operating principles of the Vitotronic
200 control. For more detailed information on the installation, operation and service as well as safety and warranty
requirements of the Vitotronic 200, reference the instructions included in the Technical Literature package s hipped with the
control.
Vitotronic 200
Installation, Operating
and Service Instructions
High temperature (boiler) heating
circuit s witch
Low temperature (mixing valv e)
heating circuit switch
Standby operation - no heating or
domestic hot water production
DHW production only - summer
operation
Space heating and DHW production
- winter operation
Normal (daytime) room temperature
Reduced (nighttime) room
temperature
Party mode (temporary override of
reduced temperature mode)
Energy saving mode (temporary
override of normal temperature
mode)
Contrast Adjustment
1. To adjust the contrast setting, press
and hold
and use or to set
contrast to desired setting.
Language Selection
1. Press or to select desired
heating circuit.
2. Press
. Scan operating data with
or until desired language
appears.
3. Press
to confirm language
selection and press
to exit.
Switching from ºCtoºF
1. Press and hold buttons and
to access coding level 2. Coding
address flashes.
2. Press
until address “88:00”
appears. Press
and press for
“88:01” to appear. Confirm
temperature unit selection by
pressing
.
3. Press and hold
and to exit
coding level 2.
Overview of Controls and Indicators
Display Settings
To Next Page
Need help?
General
