Viessmann VITOTRONIC 300-K User Manual

11
In multi boiler systems, each Vitotronic
100 indicates the boiler number on the
standard display. The following exam-
ple shows the boiler water temperature
as indicated by boiler 3.
3
4 8
°C
Press .
This takes you to the menu for settings
and scanning.
Note
If the boiler is not in operation, the fol-
lowing display is shown:
3
0
Symbols
These symbols are not always dis-
played, but appear subject to the system
version and the operating state. Flashing
displays indicate that modifications can
be made.
Menu
Information
Further adjustments
Emissions test mode
Heating program
Standby mode with frost protection
monitoring
The boiler is available to the cascade
control unit for heat production.
Messages
Service message
The service interval has expired.
Fault message
Only for type HC1B:
Burner fault
Displays
Circulation pump at output 20 is
running (only for type HC1B)
Burner in operation
Factory settings
About the controls
How to use the controls, Vitotronic 100
5592 675 GB

Viessmann VITOTRONIC 300-K Specifications

General

Type	Control Unit
Model	VITOTRONIC 300-K
Application	Heating systems
Display	LCD
Compatibility	Viessmann boilers and heating systems
Power Supply	230 V AC
Protection Class	IP20
Sensors	Temperature, pressure
Operating Modes	Automatic, manual, holiday
Operating Temperature	0°C to +45°C