ViewSonic CD4225 User Manual

ViewSonic CD4225 22
Selecting a video source
Normally the CD4225 LCD monitor automatically searches for available video sources after it is turned
on. You can also manually select one if multiple video sources are connected to the LCD monitor.
To select a video source using the control panel:
1. Press the Menu/Enter button on the control panel to display the OSD menu.
2. Press the PLUS (+) or MINUS (-)/Auto button to select Input, and then press the Menu/Enter
button.
3. Press the PLUS (+) or MINUS (-)/Auto button to select an input source (VGA, DVI, HDMI or YPbPr),
and then press the Menu/Enter button.
4. Press the Exit button several times to close the OSD menu.
To select a video source using the wireless remote control:
Press the VGA, DVI, HDMI or YPbPr button according to the video source you wish to view.
Picture Mode
Standard
Cinema
User
Vivid

ViewSonic CD4225 Specifications

General

Brand	ViewSonic
Model	CD4225
Category	Monitor
Language	English