ViewSonic CD4225 User Manual

ViewSonic CD4225 31
monitors using this function. ID numbers 1 to 26 are selectable. It is recommended to assign
sequential ID numbers from 1 and up.
• Press the ENTER button on the remote control, or the Menu/Enter button on the control panel, and
then press the / (or PLUS (+)/MINUS (-)/Auto) button to change the ID number.
Reset
• If activated, all OSD settings (except the Language setting) will be restored to the factory settings.
• Press the ENTER button on the remote control, or the Menu/Enter button on the control panel to
activate the reset.

ViewSonic CD4225 Specifications

General

Brand	ViewSonic
Model	CD4225
Category	Monitor
Language	English