ViewSonic ColorPro VP2468a H2 - DisplayPort;USB Type-C MST Daisy Chain Connection

15
DisplayPort/USB Type-C MST Daisy Chain Connecon

chain connect up to four (4) monitors.
1. Connect one end of a DisplayPort/USB Type-C cable to the DisplayPort/USB
Type-C Out port of your computer. Then connect the other end of the cable to
the DisplayPort In/USB Type-C port of the monitor.
2. 
monitor. Then connect the other end of the cable to the DisplayPort In port of
the second monitor.
3. Repeat Step 2 as needed with up to four (4) monitors.
NOTE: 
Type-CDP DP out
Type-C
HDMI
in out
OutIn OutIn
OutIn
Out
In
Out
In
Out
In
Type-C Type-C
Or
NOTE:
• 
• DisplayPort 1.2 MST must be turned on in the Setup Menu in the OSD
Menu to do daisy chaining.
• 
