ViewSonic DSM3210
6
ENGLISH
Mounting ViewSonic Digital Signage Multimedia to
the wall
The Digital Signage Multimedia can be used in a free standing position or wall-mounted. Before installing
the product to the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only ViewSonic approved wall-mounting brackets to support the Digital Signage Multimedia
weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your Digital Signage Multimedia is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to Digital Signage Multimedia safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the Digital Signage Multimedia.
• Set the Digital Signage Multimedia on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while installing plate.
• Before installing the Digital Signage Multimedia on the wall, ensure you have recorded the product
serial number on page 4 of the User Guide, as you will need the serial number to request service
should there be a service need.
• Install the wall mount plate to the Digital Signage Multimedia using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply
causing the unit to fail. The wall-mount screw type is M6 x L10.
• Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation.
Ensure there is at least 3cm of space surrounding any air-vents of your Digital Signage Multimedia
to allow adequate cooling during operation.
• Hang the Digital Signage Multimedia wall mount plate to the wall mount bracket, completing
installation. Enjoy your ViewSonic Digital Signage Multimedia!
Getting Started
Congratulations on your purchase of a ViewSonic
®
Digital Signage Multimedia.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your Digital Signage Multimedia package includes:
• Digital Signage Multimedia
• VGA HD-15 Cable
• Power Cord
• Remote Control with batteries
• ViewSonic User Guide & Quick Start Guide
To Next Page
Loading...
Need help?
General