ViewSonic E55 - OSD Lock Settings; Locking and Unlocking OSD; Adjusting Display Settings

ViewSonic E55/E55B
8
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to
prevent unwanted changes to the current image settings.
• OSD Lock : Press and hold the [1] button on the face of the monitor for 5 seconds. The
message “OSD LOCK” will then display briefly, indicating that the OSD image settings
are now locked.
• OSD Unlock : Press and hold the [1] button again for 5 seconds. The message “OSD
UNLOCK” will then display briefly, indicating that the OSD
image settings are now
unlocked.
Do the following to adjust the display settings:
1. To display the Main Menu, press button [1].
MAIN MENU 1
EXIT :
SELECT :
CONTRAST/BRIGHTNESS
ZOOM
H. POSITION / SIZE
V.
POSITION / SIZE
PINCUSHIO / PIN BALANCE
TRAPEZOID / PARALLEL
TIL
T
1
2
2. To select a setting to be adjusted, press the arrow buttons on the front control panel of
your monitor and scroll through the choices. When the desired control is highlighted,
press button [2].
Note : Some controls on the Main Menu are listed in pairs, such as Contrast/Brightness.
Display control screen (sample shown in step 3 below). Press button [2] to toggle to the
next control in the pair.
3. To adjust the setting, such as CONTRAST in the sample below, press the arrow buttons.
EXIT : 1 BRIGHTNESS : 2
CONTRAST
4. To save the adjustment and exit the menu press button [1] twice.