ViewSonic E95 - Front Control Panel

D en displa ion I
Front Control Panel for E95-1
* Scrolls down Main Menu, high- * Scrolls up Main Menu, high-
lighting control to be adjusted lighting control to be adjusted
* Decreases value of selected * Increases value of selected control
control
*
Shortcut
to
Contrast
and
* Shortcut to Contrast and Brightness adjustment screens
Brightness adjustment screens
Front Control Panel
Power Power
LED OnOff
- Displays OnView Main * Press once to display
Menu adjustmenet screen
* Exits adjustment screen * (For some controls)
and saves adjustments press again to toggle
between controls shown
in pairs on Main Menu
Using the Front Control Panel to access OnView screens
1.
2.
3.
To turn the monitor on, press the Power button (shown above).
To display to OnView Main Menu, press button [ 1 ] .
To select a user control, press the W or A button repeatedly until the control is
High lighted.
To display an OnView adjustment screen, press button [ 2 ] .
Some controls are grouped in pairs on the Main Menu (see page 12). Press button [ 2 } to toggle
between them.
To adjust the selected user control, press the W or A button.
Exception: For user controls that do not réquire adjustments, press button [ 2 ] again to activate.
(examples: Degauss, Memory Recall).
To save your adjustments and exit all screens, press button [ 1 ] twice.
The screen will clear automatically about 30 seconds after the last control button you press. To
return to the Main Menu, repeat step 2.
22