ViewSonic E95 - Horizontal Size

f=] [th H. SIZE/POSITION:
With H. SIZE/POSITION highlighted on the menu, press button [2] again to toggle between HORIZONTAL
; SIZE and HORIZONTAL POSITION.
HORIZONTAL SIZE
age the width of the screen image. [A] increases width. Iv) decreases width.
[th HORIZONTAL POSITION
Moves the screén image left or right. [A] moves the screen image right. [W] moves the screen image
left.
[| En V. sizeosition:
With V.SIZE/POSITION highlighted on the menu, press button [2] again to toggle between VERTICAL SIZE
and VERTICAL POSITION.
[$] VERTICAL SIZE
Adjusts the height of the screen image. [A] increases the screen height. [W] decreases the screen —
height.
fh VERTICAL POSITION
Moves the screen image up and down. [A] moves the screen up. [W] moves the screen down.
¥< (Ct PINCUSHION / BALANCE
With PINCUSHION/BALANCE high lighted on the menu, Press button [2] again to toggle between pincushion
and Pin-balance.
)_{ PINCUSHION
Straightens the vertical sides of the screen image. [A] curves the vertical sides outward. [W] curves the
vertical sides inward.
(_{ PIN-BALANCE
Straightens the vertical sides of the screen image. [A] curves the vertical sides to left. [W] curves the
vertical sides to righit.
L\ Fy TRAPEZOID/PARALLEL:
With TRAPEZOID/PARALLEL highlighted on the menu, press button [2] again to toggle between
TRAPEZOID and PARALLELOGRAM.
[.\_ TRAPEZOID
Makes a vertical side of the screen image parallel. [A] widens the top and narrows the bottom. [W]
natrows the top and widens the bottom.
aes PARALLEL (PARALLELOGRAM)
Slants vertical edges of the screen to the left or right. [W] slants vertical edges to left, [A] slants
vertical edges to right.
24