ViewSonic E95 - Page 30

E95-1 OSD (on screen display) function contro! method
Model name: ViewSonic E95-1
OSD Diagnostic Message Formats
1. When power is applied, but there is no input signal, the following is displayed:
PLEASE
CHECK SIGNAL
2. Ifthe monitor is in the DPMS mode, the following is displayed:
DPMS DPMS
STANDBY MODE SUSPEND MODE
DPMS
OFF MODE
3. Ifthe H-sync or V-sync inputs are out of range, the following is displayed:
FREQUENCY
OVER RANGE
27