Why does my ViewSonic LDP135-151 Monitor turn off unexpectedly?
If your ViewSonic monitor is unexpectedly turning off, check if Sleep mode is enabled. Also, check if there is a power outage in your area. You can also turn on the display, provide an active signal, and see if the problem is with the signal or external control system.
Why is there no picture or sound on my ViewSonic Monitor?
If your ViewSonic monitor displays no picture or sound, first check the power status and ensure the device is turned on. Next, inspect the signal cable to ensure it is properly connected. Finally, use the remote control to confirm that the input source setting matches the connected device.
How to fix poor picture quality on ViewSonic LDP135-151 Monitor?
To improve the picture quality on your ViewSonic monitor, start by adjusting the chroma and/or brightness settings in the menu. Also, check the signal cable to ensure it’s properly connected. For optimal display, use the monitor's native resolution for the source.
What to do if ViewSonic LDP135-151 remote control is not working?
If the remote control for your ViewSonic monitor isn't working, first check for any obstructions blocking the remote control receiver on the display. Then, verify that the batteries in the remote control are installed with the correct polarity. If the problem persists, try replacing the batteries.
How to troubleshoot unclear picture on ViewSonic Monitor?
If the picture on your ViewSonic monitor is unclear or cuts in and out, start by checking the signal cable for any loose connections or damage. Ensure that other electronics or different signal types are not interfering with the signal. For long-distance sources, consider using an optional active video cable or video extender.
How to fix no sound on ViewSonic LDP135-151?
If there is no sound on your ViewSonic monitor, first press the Mute/Unmute button. Then, adjust the volume to an audible level. Check the audio cable connection, if one is being used. If you are using a computer with digital video and embedded audio, make sure the computer speakers are set to external speakers.
What to do if ViewSonic Monitor doesn't recognize USB storage device?
If your ViewSonic monitor isn't recognizing the USB storage device, ensure the drive is formatted for FAT32 or NTFS. If the USB storage device requires external power, connect its power adapter to an electrical outlet.
Why is there sound from only one speaker on my ViewSonic LDP135-151 Monitor?
If sound is only coming from one speaker on your ViewSonic monitor, adjust the sound balance in the menu. Check the left and right sound control panel settings of the computer or media player source. Check the audio cable connection, if used. Also, ensure the content has two audio channels and is not mono.
What to do if ViewSonic Monitor power indicator is off?
If the power indicator on your ViewSonic monitor is off and there is no response, ensure the power cable is securely connected and not loose. Also, verify that the power outlet is functioning properly and meets the required electrical specifications.
General| Aspect Ratio | 16:9 |
|---|---|
| Contrast Ratio | 5000:1 |
| Connectivity | HDMI, USB |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | 72% NTSC |
| Display Size | 135 inches |
| Resolution | 1920 x 1080 (Full HD) |
To Next Page
