Selecting an Input Source
The projector can be connected to multiple devices at the same time. However, it can only display
one full screen at a time.
When Auto Source is On, the projector will automatically search for input sources. If multiple
sources are connected, press the Source button on the projector or remote control to select the
desired input.
NOTE: Ensure the connected sources are also turned on.
Adjusting the Projected Image
The projector is equipped with three (3) adjustment feet. Adjusting the feet will change the
projector’s height and the vertical projection angle.
Adjusting the Projector’s Height and Projection Angle
LS740HD - ViewSonic Projectors https://manuals.viewsonic.com/LS740HD_Full_Guide
15 von 54 29.02.2024, 12:40
To Next Page
Loading...
