Menu Description
Projection
Select the preferred projection: Front, Rear, Ceiling-
Top, and Rear-Top.
Power
Settings
Direct Power On
Automatically power on the projector when
AC power is supplied, without pressing the
Power button on the projector or the remote
control.
Signal Power On
Automatically power on the projector when a
signal is detected, without pressing the
Power button on the projector or on the
remote control.
Auto Power Off
A countdown timer will start when there is
no signal being sent to the projector. The
projector will automatically power off when
the countdown has finished (in minutes).
Security
Security
Enable or disable a password prompt before
using the projector.
NOTE: The default password is: 1234
Security Timer
Set the amount of time the projector can be
used. Once this time has elapsed you will be
requested to enter your password again.
Change Password
Set or modify the password.
HDMI CEC
When you connect HDMI CEC-compatible devices to
the projector with HDMI cables, you can control them
on the same power on or power off status using the
HDMI CEC control feature in the projector’s OSD.
This lets one device or multiple devices in a group
power on or power off via HDMI CEC in a typical
configuration.
LS740HD - ViewSonic Projectors https://manuals.viewsonic.com/LS740HD_Full_Guide
30 von 54 29.02.2024, 12:40
To Next Page
Loading...
