This product has been designed and manufactured in compliance with Directive 2011/65/EU of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Substance
Proposed
Maximum
Concentration
Actual
Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium
(Cr6⁺)
0.1% < 0.1%
Polybrominated
biphenyls (PBB)
0.1% < 0.1%
Polybrominated
diphenyl ethers (PBDE)
0.1% < 0.1%
Bis (2-ethylhexyl)
phthalate (DEHP)
0.1% < 0.1%
Butyl benzyl phthalate
(BBP)
0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate
(DIBP)
0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex III of
the RoHS2 Directives as noted below. Examples of exempted components are:
▪ Copper alloy containing up to 4% lead by weight.
▪ Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight
or more lead).
▪ Electrical and electronic components containing lead in a glass or ceramic other than dielectric
ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
▪ Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.
Restriction on Hazardous Substances statement (India). This product complies with the “India E-
waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Indian Restriction of Hazardous Substances
LS740HD - ViewSonic Projectors https://manuals.viewsonic.com/LS740HD_Full_Guide
38 von 54 29.02.2024, 12:40
To Next Page
Loading...
