48
7. Press the MENU button on the projector.
8. Select Advanced > Network Setting > Wired LAN.
9. After getting into Wired LAN, input the following:
• DHCP: Off
• IP Address: 10.10.10.10
• Subnet Mask: 255.255.255.0
• Gateway: 0.0.0.0
• DNS Server: 0.0.0.0
10. Press ENTER / . to confirm settings.
Open a web browser
(for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11. In the Address bar, input the IP address: 10.10.10.10.
12. Press ENTER /.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
To Next Page
Loading...
