ViewSonic LS832WU - Troubleshooting

66
Troubleshoong

using the projector.
Problem or Issue Possible Soluons
The projector does not
turn on
• 
projector and to the power outlet.
• If the cooling process has not completed, please

projector again.
• If the above does not work, try another power
outlet or another electrical device with the same
power outlet.
There is no picture
• 
properly, and that the video source is turned on.
• 
select the correct source with the “Source Input”
on either the projector or the remote control.
The image is blurred
• Focus Switch will help

• 
properly. If necessary, adjust the height of the


The image is reversed
• Open the OSD Menu and go to: Setup > Projecon

The image is stretched

DVD
• When you play an anamorphic DVD or 16:9 DVD,
the projector will show the best image in 16:9.
• 
the format as 4:3 in projector OSD Menu.
• Please setup the display format as 16:9 (wide)
