ViewSonic LS850WU - Page 43

43
Enter.
1
The main page of the Network Control will appear.
2
3
4
5
6
NOTE: Accessing the Network Sengs, Email Alert page, or Projector/LAN Firmware
Update page requires the Administrator’s password. The default password is
“0000”.
2. This page allows you to make adjustments to the AMX and SNMP sengs. In the
AMX device discover row, when ON is selected, the projector can be detected
by controllers of AMX connected to the same network. For the details of AMX
Device Discovery, visit the AMX web site at http://www.amx.com/.
3. If your projector is connected to a network which supports Simple Mail Transfer
Protocol (SMTP), you can congure it to alert you via email on signicant events.