ViewSonic LS850WU - Page 72

72
Menu Option Description
LAN Control Settings
LAN Settings
 DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address, Subnet Mask, Default Gateway,
DNS Server settings will be automatically retrieved.
 Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Only available when LAN Settings is
set to Static IP. Use / to select a
column and use / to adjust the
value.
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
Light Source Settings
Light Source Mode
 Normal: Provides full light source brightness.
 Eco: Reduces light source power consumpon by 30% and
lowers brightness to decrease the fan noise.
 Dynamic Eco: Reduces light source power consumpon by
up to 30% depending on the content brightness level.
 Custom: Allows you to adjust the light source power.
Light Source Power
Only available when Light Source Mode is Custom.
Reset Light Source Hours
Resets the light source timer after new light source is installed.
For changing the light source, please contact qualified service
personnel.
Light Source Hours Information
 Light Source Usage Time: Displays the number of hours
the light source has been used.