ViewSonic NX1932w - Rear View of the Product

15
ENGLISH
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic NX1932w/NX2232w
Getting Started
Rear View of the Product
Item Description
1 Power (AC input)
Plug-in the supplied AC Power cord and connect to the AC input
power source.
2
HDMI Input Terminal
Connect this port to the HDMI/HDMI-DVI jack of the compatible
equipment.
3
VGA signal input
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the
LCD TV.
4
YPbPr signal input
Connect this jack to the YPbPr output of A/V device.
5
Composite Video input
Connect this jack to the composite video output connectors on your
A/V equipment.
6
S-Video input
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
7
AV/ S-Video/ YPbPr/ DVI
Audio input (left/ right)
Connect the Audio in cable for AV/ S-Video/ YPbPr/ HDMI-DVI
from this jack to the corresponding connectors on your A/V device.
8
PC Audio input
Connect the RGB Audio Out on your computer to the RGB Audio
on the rear of the LCD TV.