To Next PageTo Next Page
Need help?Do you have a question about the ViewSonic PJ503D and is the answer not in the manual?
General| Vertical scan range | 50 - 87 Hz |
|---|---|
| Horizontal scan range | 30 - 100 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Projector native resolution | SVGA (800x600) |
| Aspect ratio | 4:3, 16:9 |
| Dimensions (WxDxH) | 263 x 108 x 218 mm |
| Power requirements | 100-240 VAC, 50/60Hz |
| Lamp power | 160 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Focus | Manual |
| HD-Ready | Yes |
| Analog signal format system | NTSC 4.43, NTSC M, PAL, SECAM |
| S-Video inputs quantity | 1 |
| Noise level | 30 dB |
| Certification | UL, FCC-B, CCC, CE, NOM, PSB, CUL, ICES-003, Argentina GS, RoHS, IRAM, CB |
| Power consumption (typical) | 250 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Market positioning | Portable |
Weight and Dimensions| Weight | 2600 g |
|---|---|
| Package weight | 3700 g |
Describes the buttons and indicators on the projector itself.
Discusses four possible installation locations for the projector.
Guides users on selecting screen size based on projector distance.
Details how to connect the projector to a PC using a VGA cable.
Provides a step-by-step guide for powering on the projector and initial setup.
Details how to adjust the projector's physical angle using its feet.
Explains choosing preset picture modes for different scenarios.
Outlines the structure of OSD menus and available functions per signal type.
Covers cleaning the lens and projector case for optimal performance.
Explains how the projector calculates and displays equivalent lamp usage hours.
Lists causes and remedies for the projector failing to power on.
Provides solutions for when no image is displayed on the screen.
Offers steps to fix issues with a blurry or unfocused projected image.
Addresses common problems with the remote control not functioning.
