Conserve Energy with DynamicEco™
With the DynamicEco™ button on the included remote
control, users can dim the projection brightness by 70%.
DynamicEco™ mode is also auto-activated whenever the
projector is idle. When DynamicEco™ mode is activated,
the lamp’s power consumption is significantly reduced—a
great energy-saving design that lowers the total cost of
ownership (TCO).
Smart Restart
With the Smart Restart feature enabled, the projector can
be quickly restarted from standby mode without waiting for a
power cycle to complete.
Convenient Auto Power On/Off Feature
All LightStream projectors automatically power on for quick
and easy startup whenever a VGA or HDMI cable is
connected. Conversely, when no signal is detected from a
VGA or HDMI cable, the projector will automatically power
off after a user-defined amount of time.
Quick Power Off
With the Quick Power Off feature enabled, the projector can
be quickly powered off in seconds rather than waiting for a
cool-down cycle to complete. This lets users pack the
projector away without having to worry about the internal fan
still running.
www.viewsonic.com
PJD5555W Scan for more information
To Next Page
Loading...
Need help?
General