To Next PageTo Next Page
Need help?Do you have a question about the ViewSonic PJD5132 and is the answer not in the manual?
General| Native aspect ratio | 4:3 |
|---|---|
| Projection distance | 1 - 11.3 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 15000:1 |
| Screen size compatibility | 24 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Focus | Manual |
| Throw ratio | 1.86 - 2.04:1 |
| Optical zoom | 1.1 x |
| Focal length range | - mm |
| Lamp power | 190 W |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| HD-Ready | Yes |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC M, PAL 60, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Supported graphics resolutions | 1600 x 1200 (UXGA) |
| RMS rated power | 2 W |
| USB connector type | Mini-USB B |
| HDMI ports quantity | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 1 |
| VGA (D-Sub) ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 2 |
| Noise level | 32 dB |
| Noise level (economic mode) | 29 dB |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Presentation |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 250 W |
| Operating altitude | 0 - 3048 m |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | AC, VGA |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 221 mm |
|---|---|
| Width | 268 mm |
| Height | 84.4 mm |
| Weight | 2100 g |
| Package depth | 188 mm |
| Package width | 360 mm |
| Package height | 325 mm |
| Package weight | 3400 g |
FCC, Canada, and CE compliance details for the device.
Essential precautions for operation, handling, and installation.
Highlights projector functionalities and design.
Description of physical controls on the projector and its remote.
Guide to selecting the best placement for the projector.
Tables detailing projection distance and image size for different aspect ratios.
Steps for connecting various devices including HDMI, Component, S-Video.
Guide to powering on, selecting signals, and using OSD menus.
Procedures for setting, changing, and disabling projector password protection.
Adjusting signals, correcting distortion, zooming, and setting aspect ratio.
Selecting picture modes and fine-tuning brightness, contrast, color, and temperature.
Checking lamp hours, extending life, and detailed replacement steps.
Solutions for common issues like no power, blurred image, or non-working remote.
Covers electrical, mechanical, input/output, and environmental specs.
Contact details (website, phone, email) by region for support.
Details on warranty terms, what's covered/not covered, and how to get service.
