To Next PageTo Next PageHow to fix ViewSonic PJD5112 Projector with no power?
If your ViewSonic Projector has no power, several issues could be the cause. First, check the AC socket and its connection. If the fan fails after turning on, try reconnecting the fan or replacing the AC unit. Other solutions include replacing the power board, fan, Safety Switch board, keypad, checking the LED, keypad, and FFC, or checking the 7 pin Fuse.
What to do if ViewSonic Projector fail to light up?
If your ViewSonic Projector fails to light up, begin by checking the LED indicator and follow any indicative actions. If that doesn't resolve the issue, consider replacing the Lamp Module, power board, Ballast, Main board, or CW module.
What to do if ViewSonic PJD5112 Projector says 'Video No Signal'?
If your ViewSonic Projector shows 'Video No Signal', first ensure the source is turned on. If that doesn't work, try replacing the cable. As a last resort, the Main board might need replacement.
How to fix abnormal image on ViewSonic PJD5112?
If the image on your ViewSonic Projector is abnormal, try powering it on again and resetting the OSD. You can also adjust the input signal setting. If the issue persists, the Main board or Optical Engine may need to be replaced.
How to fix Remote Control Failure on ViewSonic PJD5112?
If the remote control for your ViewSonic Projector fails, first replace the battery. If that doesn't solve the problem, try replacing the remote control itself. If the issue continues, the IR or Main board might need to be replaced.
General| Projection distance | 1.2 - 10 m |
|---|---|
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Projector native resolution | SVGA (800x600) |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 280 x 218 x 114 mm |
| Power requirements | 90~240VAC |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 5000 h |
| Focus | Manual |
| RMS rated power | 2 W |
| Headphone outputs | 2 |
| Serial interface type | RS-232 |
| Noise level | 30 dB |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 235 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product type | Standard throw projector |
| Market positioning | Presentation |
Weight and Dimensions| Weight | 2600 g |
|---|
Details FCC compliance rules and conditions for device operation.
States compliance with Canadian ICES-003 and EU directives.
Information regarding WEEE directive and battery disposal for EU states.
Covers safe usage, cleaning, ventilation, and avoiding heat sources.
Covers grounding plug safety and power cord handling.
Guidelines for using accessories, carts, unplugging, and seeking service.
Lists the key features and technologies of the DLP projector.
Identifies and labels the components visible on the front of the projector.
Identifies and labels components on the rear and bottom of the projector.
Details the projector's control panel, including LED indicators and button functions.
Illustrates various cable connections for different video sources.
Step-by-step guide to turn on the projector and its source devices.
Step-by-step guide to safely turn off the projector and its cooling cycle.
Instructions on using elevator and tilt-adjustment feet for projector height.
Details on using the zoom and focus rings for image clarity and size.
Adjustments for brightness, contrast, color, keystone, aspect ratio, and image presets.
Settings for computer input, including frequency, tracking, and position.
Settings for video input, including saturation, sharpness, and tint.
Options for volume and mute control.
Covers menu position, projection, signal type, lamp, filters, power saving, ECO mode, OSD timeout.
Settings for blank screen, password, screen capture, DCR, and closed caption.
Selecting language, restoring defaults, and viewing system information.
Details on adjusting brightness, contrast, color settings, and user color.
Correcting distortion (keystone), fitting picture (aspect ratio), and using image presets.
Settings for gamma, 3D sync, frequency, tracking, and position adjustments.
Settings for saturation, sharpness, tint, volume, mute, and projection orientation.
Specifying signal, managing lamp hours, and filter mode.
Configuring power saving, ECO mode, and high altitude cooling.
Setting OSD display duration and blank screen options.
Explains password, screen capture, zoom, DCR, and closed caption settings.
Enhancing color spectrum with Brilliant Color and enabling low power Green Mode.
Selecting language, restoring defaults, and viewing system information.
Proper method for cleaning the projector lens using lens cleaning paper.
Guidelines for cleaning the projector's exterior casing.
Addresses issues when the projector does not turn on or show lights.
Solutions for searching source, out-of-focus, flickering, or unstable images.
Troubleshooting steps if the remote control is not functioning.
Details what parts and labor are covered under the projector's warranty.
Lists exclusions from warranty coverage, such as accidental damage or misuse.
Instructions on how to obtain warranty service and what information is needed.
Covers implied warranties, damage exclusions, and state law effects.
Information for warranty service for products sold outside North America.
Details coverage for defects in material and workmanship for Mexico.
Specifies the duration of warranty coverage for parts and labor in Mexico.
Lists exclusions from warranty coverage for Mexico.
Instructions for obtaining warranty service within Mexico.
