EasyManuals Logo

ViewSonic PJD5112 User Manual

ViewSonic PJD5112
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
EN-28
Appendix
LED Indicator Messages
LED Type Color Status Meaning
Power LED Blue Solid
The projector is in standby
mode.
Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid
Powering upLamp LED Off Off
Temp LED Off Off
Power LED Blue Solid
Normal operationLamp LED Off Off
Temp LED Off Off
Power LED Blue Flash
Power-downLamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (Full brightness)
The projector system has some
problems with its fans, so the
projector cannot start up.
Lamp LED Red Solid
Temp LED Red Flash
Power LED Blue Solid (Full brightness)
The lamp is in good condition
and is projecting at maximum
brightness.
Lamp LED Off Off
Temp LED Off Off
Power LED Blue Solid (Full brightness) The lamp has reached its end
of life and must be changed
soon. The lamp will continue to
operate until it fails . Change
the lamp. If the lamp is off, then
the ballast will become
malfunction.
Lamp LED Off Solid
Temp LED Off Solid
Power LED Blue Flash (Full
brightness)
The projector is shutting and
the fan motor is cooling the
lamp for shutdown. Do not
unplug the power cord or turn
the power off before the Lamp
LED changes to flashing. The
fan motor will turn off when the
lamp has cooled.
Lamp LED Red Solid
Temp LED Red Solid
Power LED Blue Solid (Full brightness) Temperature is too high. The
lamp will turn off. The fan motor
is cooling the lamp.
Lamp LED Red Flash
Temp LED Red Off
Power LED Off Off The lamp ignition failed. If
temperature is too high, the
fans will cool the lamp.
Lamp LED Red Solid
Temp LED Red Solid

Other manuals for ViewSonic PJD5112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic PJD5112 and is the answer not in the manual?

ViewSonic PJD5112 Specifications

General IconGeneral
Projection distance1.2 - 10 m
Projection technologyDLP
Contrast ratio (typical)2000:1
Projector native resolutionSVGA (800x600)
Aspect ratio4:3, 16:9
RS-232 ports1
Dimensions (WxDxH)280 x 218 x 114 mm
Power requirements90~240VAC
Lamp power180 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)5000 h
FocusManual
RMS rated power2 W
Headphone outputs2
Serial interface typeRS-232
Noise level30 dB
Power consumption (standby)1 W
Power consumption (typical)235 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Product typeStandard throw projector
Market positioningPresentation
Weight and Dimensions IconWeight and Dimensions
Weight2600 g

Related product manuals