To Next PageTo Next PageWhy won't my ViewSonic Projector turn on?
If your ViewSonic Projector isn't turning on, first ensure the power cord is securely plugged into both the projector's AC inlet and a functioning power outlet. Check that the power outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again.
Why is my ViewSonic Projector remote not working?
If the remote control for your ViewSonic Projector isn't working, try these solutions: 1. Replace the battery with a new one. 2. Remove any obstacles between the remote and the projector. 3. Ensure you are within 8 meters (26 feet) of the projector.
What to do if ViewSonic PJD5155 remote control does not work?
If your ViewSonic Projector's remote control isn't working, here are a few things to try: * First, replace the battery with a new one. * Make sure there's nothing blocking the path between the remote and the projector. * Ensure you're within 8 meters (26 feet) of the projector. * Finally, check and adjust the remote control code to ensure it's consistent with the projector.
How to fix ViewSonic PJD5155 that does not turn on?
If your ViewSonic Projector isn't turning on, consider these potential causes: * Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
What to do if my ViewSonic PJD5155 has no picture?
If you're not seeing a picture on your ViewSonic Projector, start by ensuring your video source is turned on and properly connected with the signal cable. Verify the projector is correctly connected to the input signal device. Finally, use the Source key on the projector or remote to select the correct input signal.
How to fix a blurred image on a ViewSonic PJD5155?
If your ViewSonic Projector image is blurred, try these steps: * Adjust the focus of the lens using the focus ring. * Adjust the projection angle, direction, and height of the projector to properly align it with the screen.
Why ViewSonic PJD5155 Projector has no picture?
If your ViewSonic Projector displays no picture, several factors could be the cause: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify that the projector is correctly connected to the input signal device. * Confirm that the correct input signal is selected using the Source key on the projector or remote control.
Why is my ViewSonic PJD5155 image blurred?
If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * Adjust the focus of the lens using the focus ring. * Make sure the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector if needed.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 4:3 |
| Projection distance | 1 - 8 m |
| Projection technology | - |
| Contrast ratio (dynamic) | 15000:1 |
| Contrast ratio (typical) | 2400:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -40 - 40 ° |
| Projector brightness (economic mode) | 2560 ANSI lumens |
| Offset | 100 % |
| Throw ratio | 1.86 - 2.04:1 |
| Digital zoom | 2 x |
| Optical zoom | 1.1 x |
| Focal length range | - mm |
| Lamp power | 190 W |
| Light source type | Lamp |
| Service life of light source | 10000 h |
| Service life of light source (economic mode) | 6000 h |
| 3D | Yes |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Audio (L/R) in | 0 |
| USB connector type | Mini-USB B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Noise level | 34 dB |
| Certification | CB, TUV-GS, UL/cUL, FCC, CE, C-Tick, EAC, UkrSEPRO/EMC DOC, UL COC, TUV-S, PSB, KCC, KC, SASO, CCC WEEE, RoHS, REACH, SVHC, ErP |
| Noise level (economic mode) | 31 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, IND, ITA, JPN, KOR, POL, POR, RUS, SWE, THA, TUR, VIE |
| RMS rated power | 2 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Presentation |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 265 W |
| Operating altitude | 0 - 3048 m |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 228 mm |
|---|---|
| Width | 316 mm |
| Height | 103.7 mm |
| Weight | 2100 g |
| Package depth | 225 mm |
| Package width | 410 mm |
| Package height | 345 mm |
| Package weight | 3400 g |
Device compliance with FCC Rules for radio frequency energy.
Statement regarding compliance with Industry Canada regulations.
Device compliance with EMC and Low Voltage Directives for Europe.
Product compliance with EU Directive 2011/65/EU on hazardous substances.
Product compliance with India's E-waste Rule 2011 on hazardous substances.
Key safety precautions for operating the projector safely and preventing damage.
Details on copyright ownership and usage restrictions for the manual.
Instructions for registering the product online or via mail for future service.
Guidelines for environmentally responsible disposal of the projector and its components.
Specific safety precautions for mounting the projector on a ceiling.
Highlights key features and capabilities of the DLP projector.
List of standard accessories provided with the projector.
List of optional accessories that can be purchased separately.
Diagram and labels for the front and upper side of the projector.
Diagram and labels for the rear and lower side connection ports.
Description of buttons and indicators on the projector's control panel.
Explanation of the buttons and their functions on the remote control.
Details on mouse mode, presentation timer, and other advanced remote features.
Instructions for using the remote control as a computer mouse.
Step-by-step guide for replacing the batteries in the remote control.
Guidance on selecting the optimal location for projector installation.
Table detailing projection distance and image size for various screen sizes.
Projection dimensions specific to the PJD5555w model.
Basic instructions and precautions for connecting the projector to sources.
Instructions for connecting a PC or external monitor to the projector.
Explanation of different video connection types and their quality.
Steps for connecting an HDMI source device to the projector.
Instructions for connecting a composite video source device.
Step-by-step guide for powering on the projector.
Explanation of the projector's OSD menu structure and navigation.
Instructions for setting, using, and managing the projector's password function.
Procedure to follow if the projector password is forgotten.
How to manually select the desired input signal source.
Using the adjuster foot to set the projector's vertical angle and height.
Using Auto Sync to optimize picture quality by adjusting frequency and clock.
Using zoom and focus rings to sharpen and size the projected image.
Steps to correct trapezoidal image distortion using remote or OSD.
Using zoom function to magnify and pan the projected image.
Guide to selecting aspect ratios (Auto, 4:3, 16:9, 16:10, Anamorphic).
Choosing predefined picture modes for different environments and content.
Correcting colors when projecting onto non-white surfaces.
Detailed instructions for adjusting core image quality parameters.
Adjusting the gamma setting for picture brightness and input source relationship.
Choosing color temperature (Cool, Neutral, Normal, Warm) for image tone.
Configuring the on-screen timer for presentations.
Temporarily blanking the projected screen.
Preventing accidental changes by locking the projector's control keys.
Guidelines for operating the projector at high altitudes.
Enabling synchronized power on/off operation via HDMI.
Instructions for viewing 3D content with the projector.
Functions available when the projector is plugged in but not fully on.
Muting sound and adjusting volume levels.
Introduction to the projector's On-Screen Display (OSD) menu structure.
Detailed description of options within the DISPLAY menu.
Detailed description of options within the PICTURE menu.
Solutions for common issues like no power or poor picture quality.
Troubleshooting steps for when the remote control is not working.
Technical specifications including resolution, lamp, power, and weight.
List of all input and output connection ports on the projector.
Operating temperature, humidity, and altitude guidelines.
Instructions for installing, cleaning, and resetting the projector's dust filter.
Details on lamp hours, economic mode, and power saving for lamp longevity.
Table detailing timing for various Analog RGB signals.
Table detailing timing for various HDMI signals.
Explanation of indicator lights for power, lamp, and thermal events.
Table mapping remote control keys to their infrared command codes.
Address codes for controlling the projector via RS232.
Pin assignments and interface protocol for RS232 communication.
Contact details for technical support and product service by region.
Explanation of what the projector warranty covers and its duration.
List of conditions and damages not covered by the projector warranty.
Instructions for obtaining warranty service and support.
Details on implied warranties, damages, and legal rights.
Specific warranty terms and conditions applicable to products sold in Mexico.
Contact details for authorized service providers within Mexico.
