ViewSonic PJD5112 User Manual

EN-11
Remote Control
POWER
Turn the projector on or off.
Four directional buttons
Use four directional buttons to
select items or make adjustments
to your selection.
MENU
Display or exit the on-screen display
menus.
Enter
Confirmed selections.
Exit
Exit OSD Menu.
Keystone+ / -
Adjust image distortion caused by
tilting the projector.
Magnify
Zoom in and out the images.
Freeze
Press “Freeze” to pause the screen image.
Press again to cancel the freeze function.
Source
Manually select an input source.
Mute
Cut off the sound temporarily. Press again
to cancel the Mute function.
Auto
Resynchronize the projector to the
input signal from a computer. This
function is available for
computer
mode only.
Blank
Cut off the screen temporarily. Press
again to cancel the Blank Screen
function.
Mouse
Switch between OSD control and
Mouse control (Apply to
Navigation buttons, Enter/Mouse
Left Click, and Exit/Mouse Right
Click buttons).
Volume + / -
Adjust the volume level.
ViewM
Switch in between high brightness
performance or Accuracy color
performance.
1
2
3
4
5
6
7
12
8
13
9
14
10 15
11

ViewSonic PJD5112 Specifications

General

Projection distance	1.2 - 10 m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	280 x 218 x 114 mm
Power requirements	90~240VAC
Lamp power	180 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
Focus	Manual
RMS rated power	2 W
Headphone outputs	2
Serial interface type	RS-232
Noise level	30 dB
Power consumption (standby)	1 W
Power consumption (typical)	235 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Product type	Standard throw projector
Market positioning	Presentation

Weight and Dimensions

Weight	2600 g