ViewSonic PJD5132 - Projector Exterior View

6
Projector exterior view
1. External control panel
(See "Projector" on page 7 for
details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Front IR remote sensor
5. Adjuster foot
6. Focus and Zoom rings
7. Projection lens
8. RS-232 control port
9. Type B USB port
10. HDMI port
11. RGB (PC)/Component video
(YPbPr/YCbCr) signal input
socket-2
12. RGB (PC)/Component video
(YPbPr/YCbCr) signal input
socket-1
13. RGB signal output socket
14. S-Video input socket
15. Video input socket
16. Audio signal input socket
Audio signal output socket
17. Kensington anti-theft lock slot
18. AC power cord inlet
Warning
• THIS APPARATUS MUST BE EARTHED.
• When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring,
or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should
occur during operation of the unit, operate the disconnect device to switch the power supply
off, or disconnect the power plug.
1
2
3
4
5
6
7
Front/upper side
17
8
9
11
14
13
15
16
12
18
17
8
10
9
11
14
13
15
16
12
18
Rear/lower side
PJD5134/PJD5234L/PJD5533w
PJD5132/PJD5232L