ViewSonic PJD5132 Specifications

Light, Bright, and Portable Projector
SVGA Projector
PJD5132
Take Control of Audience’s Focus
With the DynamicEco button on the remote, take command of
presentations by dimming the screen image up to 70%. The projector
will also auto activate DynamicEco when the unit is not in use.
When DynamicEco is
activated, the lamp's
power consumption is
significantly reduced –
a great energy-saving
design for low Total Cost
of Ownership (TCO).
Bright in Virtually Any Setting
Packed with 2800 lumens and a high contrast ratio of 15,000:1
(with DynamicEco), your presentations are guaranteed to be vibrant
even in the brightest ofce environments.
The ViewSonic
®
PJD5132 is a high-performance SVGA
800x600 DLP
®
projector with 2800 ANSI lumens and
15000:1 contrast ratio. With DynamicEco
™
technology,
presenters can put the projector in “standby” mode
by reducing brightness down to 30% when they
need to shift audience’s focus without restarting the
projector. This projector offers a variety of hardware
and software features including multiple PC and video
input options, 1.1x optical zoom, keystone correction,
PC 3D-ready/120Hz, support HD signal and integrated
speaker. Filter-less design and energy-saving Eco-mode
provide for easy maintenance and reliable product life.
The PJD5132 lightweight design is ideal for tabletop use
or ceiling mounting in both classrooms and corporate
ofces.
Maintenance Free
ViewSonic's PJD5132 projector features a lter-less design. Unlike LCD
projectors that require the user to clean, sometimes to replace, lters after
every 100 to 300 hours of operation, ViewSonic's PJD5132 projector is
lter-less, eliminating the need for lter cleaning or lter replacement. This
saves you signicant maintenance dollars and labor over the projector’s
lifespan, and lowers your total cost of ownership (TCO).
Reliable Picture Quality & Color Performance
ViewSonic DLP projectors provide reliable picture quality you can trust and
superior color performance you can count on after thousands of hours of
usage. Built on DLP technology, The ViewSonic PJD5132 projector virtually
eliminates image degradation known as color decay – yellow/faded tint that
LCD projectors may develop after extended use. Even after years of use,
the PJD5132 is still producing a stunning, sharp image that lasts.
With DynamicEco™ Without DynamicEco™

ViewSonic PJD5132 Specifications

General

Native aspect ratio	4:3
Projection distance	1 - 11.3 m
Projection technology	DLP
Contrast ratio (typical)	15000:1
Screen size compatibility	24 - 300 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-40 - 40 °
Focus	Manual
Throw ratio	1.86 - 2.04:1
Optical zoom	1.1 x
Focal length range	- mm
Lamp power	190 W
Light source type	Lamp
Service life of light source	4500 h
Service life of light source (economic mode)	6000 h
Full HD	No
HD-Ready	Yes
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC M, PAL 60, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L
Supported graphics resolutions	1600 x 1200 (UXGA)
RMS rated power	2 W
USB connector type	Mini-USB B
HDMI ports quantity	0
Serial interface type	RS-232
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	3
Component video (YPbPr/YCbCr) in	2
Noise level	32 dB
Noise level (economic mode)	29 dB
Placement	Desktop
Product type	Standard throw projector
Product color	Black
Market positioning	Presentation
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	250 W
Operating altitude	0 - 3048 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	AC, VGA
Sustainability certificates	RoHS

Weight and Dimensions

Depth	221 mm
Width	268 mm
Height	84.4 mm
Weight	2100 g
Package depth	188 mm
Package width	360 mm
Package height	325 mm
Package weight	3400 g