To Next PageTo Next Page
Need help?Do you have a question about the ViewSonic PJD6221 and is the answer not in the manual?
General| Matrix size | 0.55 \ |
|---|---|
| Number of colors | 16.78 million colors |
| Projection distance | 1.2/10 m |
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 30 - 80 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | ±40 ° |
| Keystone correction, horizontal | 40 ° |
| Focus | Manual |
| Digital zoom | 1.2 x |
| Focal length range | 18.36 - 22.02 mm |
| I/O ports | 1 × RCA jack 1 × 4-pin mini-DIN |
| Audio input | 1 × 3.5 mm mini jack |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 280 x 218 x 108 mm |
| Power requirements | AC 100-240 V, 50 - 60 Hz, 2.5A |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Analog signal format system | SECAM |
| RMS rated power | 2 W |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Color depth | 24 bit |
| Certification | CB, ROHS, WEEE, UL/cUL, FCC-B, ICES-003, IRAM (Argentina), NOMPSB, C-tick, EK, CE, TUV/GS, GOST-R, Hygienic, SASO UKrSEPRO, CCC |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 235 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 30 - 85 % |
| Market positioning | Presentation |
Weight and Dimensions| Weight | 2700 g |
|---|
Illustrates and describes how to connect various external devices to the projector.
Steps to turn on the projector and its initial warm-up procedure.
Steps to properly turn off the projector and its cooling cycle.
Explains how to adjust picture settings for both computer and video inputs.
Steps to prepare for network control and configure automatic IP address assignment via DHCP.
Guides on manually setting IP address, subnet mask, and gateway for network control.
Instructions for logging into the projector's web interface and configuring network settings.
Details settings for administrator and user passwords for network access.
Provides instructions for cleaning the projector's lens and exterior housing.
Provides solutions for common projector issues including startup, image display, and remote control.
Details what the warranty covers, exclusions, and warranty periods for parts, labor, and lamps.
Covers how to get service, warranty limitations, damage exclusions, and state law effects.
Details warranty terms, exclusions, and service procedures specific to Mexico.
