To Next PageTo Next PageWhy won't my ViewSonic PJD6245 Projector turn on?
Your ViewSonic Projector might not turn on due to a couple of reasons. First, ensure the power cord is properly plugged into both the projector's AC inlet and a working power outlet, and that the outlet switch is on. Second, if you've recently turned it off, it may be in the cooling down process. Wait until this process is complete before attempting to turn it on again.
How to fix a ViewSonic PJD6245 Projector remote control that is not working?
If your ViewSonic Projector's remote control isn't working, try these steps: 1. Replace the battery with a new one. 2. Make sure there is nothing blocking the path between the remote and the projector. 3. Ensure you are within 8 meters (26 feet) of the projector.
What to do if my ViewSonic Projector has no picture?
If your ViewSonic Projector displays no picture, several things could be wrong. First, make sure that the video source is turned on and the signal cable is correctly connected. Next, verify the projector is correctly connected to the input signal device. Finally, ensure that you've selected the correct input signal using the SOURCE key on either the projector or the remote control.
How to fix a blurred image on a ViewSonic PJD6245 Projector?
A blurred image on your ViewSonic Projector can often be resolved with a few adjustments. First, adjust the focus of the lens using the focus ring. Second, make sure that the projector and the screen are aligned properly by adjusting the projection angle, direction, and height of the projector, if necessary.
General| Brightness | 3500 ANSI Lumens |
|---|---|
| Resolution | XGA (1024 x 768) |
| Display Technology | DLP |
| Projection Size | 30 - 300 inches |
| Lamp Life | 5000 hours (Eco Mode) |
| Weight | 2.5 kg (5.5 lbs) |
| Projection Distance | 3.28 ft to 32.8 ft |
| Zoom Ratio | 1.1x |
| Input Connectors | HDMI, VGA, Composite Video, S-Video |
| Throw Ratio | 1.96-2.15:1 |
Discusses FCC compliance rules for digital devices and interference.
Discusses four possible installation locations for the projector.
Details connecting PCs, notebooks, and monitors to the projector.
Step-by-step guide for powering on and initializing the projector.
Choosing predefined picture modes for different input signals.
