56
Menu Option Description
LAN Control Settings
(only for
PX728-4K/PX748-4K)
LAN Settings
DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address, Subnet Mask, Default Gateway,
DNS Server settings will be automatically retrieved.
Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Only available when LAN Settings is
set to Static IP. Use / to select a
column and use / to adjust the
value.
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
To Next Page
Loading...
