ViewSonic PX701-4K - Page 55

55
Menu Option Description
HDMI Settings
HDMI Format
Select a suitable color space according to the color space
setting of the output device connected.
 Auto: Sets the projector to detect the color space seng
of the input signal automacally.
 RGB: Sets the color space as RGB.
 YUV: Sets the color space as YUV.
HDMI Range
Select a suitable HDMI color range according to the color range
setting of the output device connected.
 Auto: Sets the projector to detect the HDMI range of the
input signal automacally.
 Enhanced: Sets the HDMI color range as 0 - 255.
 Normal: Sets the HDMI color range as 16 - 235.
HDR
HDR/HLG
The projector supports HDR/HLG imaging sources. It can
automatically detect the dynamic range of the source, and
optimize image gamma and color settings to reproduce
contents under wide range of light conditions. You also select
SDR.
EOTF
The projector can automatically adjust the brightness levels
of your image according to the input source. Normally, the
default setting “Mid” is recommended. If the brightness of the
projected image is dark, please use “Low”. When giving priority
to gradation property, please use “High”.
Ultra Fast Input
The Ultra Fast Input function helps you deliver commands
exactly when you want without delay, giving you a competitive
advantage when gaming and improving the overall projector
gaming experience.
When enabled, the following settings will return to
factory preset values: Warping, Keystone, Corner Adj.,
Digital Lens Shift, Zoom.
NOTE: This funcon is only available when a nave ming input
signal is selected.