To Next PageTo Next PageWhat to do if ViewSonic Projector remote control does not work?
If your ViewSonic Projector's remote control isn't working, here are a few things to try: * First, replace the battery with a new one. * Make sure there's nothing blocking the path between the remote and the projector. * Ensure you're within 8 meters (26 feet) of the projector. * Finally, check and adjust the remote control code to ensure it's consistent with the projector.
How to fix ViewSonic PX800HD Projector that does not turn on?
If your ViewSonic Projector isn't turning on, consider these potential causes: * Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
Why ViewSonic PX800HD has no picture?
If your ViewSonic Projector displays no picture, several factors could be the cause: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify that the projector is correctly connected to the input signal device. * Confirm that the correct input signal is selected using the Source key on the projector or remote control.
Why is my ViewSonic Projector image blurred?
If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * Adjust the focus of the lens using the focus ring. * Make sure the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector if needed.
General| Type | lamp |
|---|---|
| Light Source Life | 3000 hours |
| Color | gray/white, multi |
| Display | dlp |
| Resolution | full hd (1080p) |
| Native Resolution | 1920 x 1080 |
| Contrast Ratio | 10, 0000:1 |
| Aspect Ratio | 16:9 |
| Throw Ratio Range | 0.23:1 |
| 3D | no |
| Minimum Screen Size | 70.1 inches |
| Maximum Screen Size | 150 inches |
| Optical Zoom | none |
| Minimum Distance | 1.2 feet |
| Maximum Distance | 2.6 feet |
| USB Ports | 1 |
| RS-232 Port | 1 |
| Video Input | hdmi, composite video, component video, vga |
| Inputs | mini-usb, composite video, component video, vga, 3.5mm audio, rca |
| Built In Speakers | yes |
| Speakers Output | 10 watts |
| Remote Control | yes |
| OS Compatibility | mac, windows |
Weight and Dimensions| Depth | 6 inches |
|---|---|
| Height | 15.3 inches |
| Width | 17.1 inches |
| Net Weight | 13.4 pounds |
Device compliance with FCC Rules, including conditions for operation and interference.
Device compliance with EMC and Low Voltage Directives for European countries.
Essential safety precautions for operating and maintaining the projector, including usage, cleaning, and power.
Key safety measures for projector operation, including lens, lamp, and environmental considerations.
Specific safety guidelines and recommendations for securely mounting the projector onto a ceiling.
Description and function of the physical buttons and indicators on the projector unit.
Explanation of buttons and their operations on the projector's remote control.
Guidance on selecting optimal installation locations for the projector based on room layout and screen.
Detailed steps for connecting a computer to the projector via VGA and USB.
Recommendations for connecting devices using HDMI for optimal video quality.
Step-by-step instructions for powering on the projector and initial setup.
Procedure for setting a password to prevent unauthorized projector use.
Information and steps for recovering or recalling a forgotten password.
Steps to follow to initiate the password recall process for forgotten passwords.
Instructions for modifying the existing projector password.
Procedure to turn off the password protection feature on the projector.
Selecting the active input source for the projector display.
Correcting trapezoidal image distortion caused by projector angle and alignment.
Methods to correct trapezoidal image distortion using remote or OSD menus.
Proper procedure for powering off the projector, including cooling time.
Managing password security, panel key lock, and remote control codes.
Procedure for replacing the projector lamp, requiring qualified service personnel.
Solutions for power-related issues, including power cord and cooling process.
Troubleshooting steps for missing video signals, connection, and source selection.
Detailed technical specifications including resolution, lamp type, input/output connectors, and electrical requirements.
ViewSonic's warranty for product defects in material and workmanship under normal use.
Warranty periods for general use and heavy usage scenarios in North/South America.
Procedure for obtaining warranty service, including required information and shipping.
Details on warranty coverage, duration for parts, labor, and lamp in Mexico.
Steps to follow for obtaining warranty service, including required information and shipping.
