To Next PageTo Next Page
Need help?Do you have a question about the ViewSonic PJ759 and is the answer not in the manual?
General| Native aspect ratio | 4:3 |
|---|---|
| Projection distance | - m |
| Vertical scan range | 56 - 120 Hz |
| Horizontal scan range | 31 - 106 kHz |
| Projection technology | LCD |
| Supported aspect ratios | 16:9 |
| Contrast ratio (typical) | 500:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -30 - 30 ° |
| Lamp type | UHB |
| Lamp power | 220 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Focus | Manual |
| Zoom capability | Yes |
| Focal length range | - mm |
| 3D | - |
| Full HD | No |
| Analog signal format system | NTSC 4.43, NTSC M, PAL, SECAM |
| Supported graphics resolutions | 1600 x 1200 (UXGA) |
| RMS rated power | 7 W |
| Number of built-in speakers | 1 |
| HDMI ports quantity | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Noise level | 36 dB |
| Certification | UL 60950, C-UL, FCC-B, UL-DEMKO/GS, CCC, CB, CE, C-TICK, GOST, NOM, PSB, TUV-S |
| Dimensions (WxDxH) | 340 x 270 x 100 mm |
| Power requirements | 100 - 240 VAC, 50 - 60 Hz |
| Power source | AC |
| Power consumption (standby) | - W |
| Power consumption (typical) | 290 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Portable |
Weight and Dimensions| Weight | 3500 g |
|---|
Details compliance with FCC regulations for Class B digital devices.
Outlines compliance with Canadian ICES-003 standards.
Confirms adherence to EEC directives for EMC and safety.
Instructions to read and follow all safety warnings and guidelines.
Guidelines for proper installation, ventilation, and avoiding hazards.
Warnings and procedures for power connection and servicing.
Statement on compliance with the RoHS Directive for hazardous substances.
Safety measures for handling the high-pressure lamp and its components.
Warnings about hot parts like the lamp cover and exhaust vents.
Identification of all input/output ports on the rear panel.
Labeled diagram of remote control buttons and their functions.
Charts for determining screen size and projection distance.
Charts for determining screen size and projection distance for the PJ759 model.
Precautions regarding projector placement, stability, and tilting.
Warnings about ventilation, heat sources, and avoiding overheating.
Warnings against using the projector near water or in damp environments.
Step-by-step guide for connecting the power cord.
Warnings about using correct cables and connecting to proper ports.
Detailed steps for connecting the power cord safely.
Instructions for battery installation and replacement.
Safety precautions for battery usage and disposal.
Instructions for using the remote control as a PC input device.
Step-by-step guide for turning the projector on.
Step-by-step guide for turning the projector off.
Safety warnings regarding light emission and hot surfaces.
How to switch between different input signals using buttons.
Further details on selecting input signals.
How to adjust the projector's vertical position using adjustment feet.
How to adjust zoom and focus for image clarity.
How to use the auto adjustment for computer signals.
How to move the projected image horizontally and vertically.
How to correct trapezoidal distortion of the image.
General guide to navigating and operating the projector's menus.
How to perform auto or manual keystone correction.
Customizing GAMMA and color temperature with user settings.
Adjusting vertical and horizontal image position.
Using auto adjustment for various signal types.
Step-by-step guide for replacing the projector lamp.
Safety warnings and precautions during lamp replacement.
Detailed safety warnings regarding lamp handling and potential hazards.
Step-by-step guide for cleaning the air filter.
Identifying issues that may not be actual malfunctions.
