ViewSonic VA2033-LED User Manual

ViewSonic VA2033-LED/VA2033a-LED 7
Wall Mounting (Optional) For use only with UL Listed Wall Mount Bracket
To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
®
or your local
dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1. Verify that the power button is turned Off, then disconnect the power cord.
Step 2. Lay the LCD display face down on a towel or blanket.
Step 3. Remove the four screws attaching the base.
Step 4. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm
x 100 mm distance), using screws of correct length.
Step 5. Attach the LCD display to the wall, following the instructions in the wall-mounting
kit.
Step 4. Four
VESA screw
holes
Step 3. Four screws
attaching the base

ViewSonic VA2033-LED Specifications

General

3D	No
Aspect ratio	16:9
Display diagonal	20 \
Separate H/V sync	Yes
Display resolution	1600 x 900 pixels
Vertical scan range	50 - 75 Hz
Horizontal scan range	24 - 82 kHz
Viewing angle, vertical	160 °
Display number of colors	-
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
DVI-I ports quantity	0
Certification	UL, CUL, FCC-B (ICES), CB, CCC, CEL, WEEE, RoHS, ENERGY STAR 5.0, EPEAT-Silver, Windows 7
Product color	Black
Tilt angle range	5 - 20 °
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	22 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	130 mm
Package width	532 mm
Package height	450 mm
Package weight	4000 g
Cables included	AC, VGA
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	191.1 mm
Height (with stand)	376.1 mm
Weight (with stand)	2700 g
Depth (without stand)	61.5 mm
Width (without stand)	480 mm
Height (without stand)	304.8 mm
Weight (without stand)	2400 g