To Next PageTo Next PageHow to fix wrong colors on ViewSonic monitor?
To resolve wrong or abnormal colors on your ViewSonic monitor, check the video cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also connect the monitor to another computer to test.
What to do if the ViewSonic VA2708-HDJ Monitor screen image is too light or dark?
To fix a screen image that is too light or dark on your ViewSonic monitor, adjust the brightness and contrast settings via the OSD Menu. If that doesn't work, reset the monitor to factory settings.
Why is the screen image blurred on my ViewSonic monitor?
If the screen image on your ViewSonic monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
What to do if external device is connected but no image appears on the ViewSonic VA2708-HDJ Monitor?
If the external device is connected, but no image appears on the screen of your ViewSonic monitor, make sure the Power is On. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection.
What to do if my ViewSonic VA2708-HDJ has power but no image?
If your ViewSonic monitor has power but no image, ensure the video cable is properly connected, adjust brightness and contrast, and select the correct input source.
Why does the screen image cut in and out on my ViewSonic VA2708-HDJ Monitor?
If the screen image on your ViewSonic monitor cuts in and out, ensure the correct input source is selected and that the video cable is properly and securely connected. Also, check the video cable connector for bent or broken pins.
How to fix no audio output on ViewSonic monitor?
If you're experiencing no audio output from your ViewSonic monitor, ensure the mini stereo jack is connected if using ear-/headphones. Also, make sure the volume is not muted or set to 0, and check the Audio Input setting.
How to troubleshoot no power on a ViewSonic VA2708-HDJ Monitor?
If your ViewSonic monitor has no power, make sure you have turned it on by pressing the Power button. Ensure the power cord is properly and securely connected to the monitor and power outlet. You can also plug another electrical device into the power outlet to verify that the outlet is supplying power.
What to do if OSD Menu does not appear on the ViewSonic VA2708-HDJ Monitor?
If the OSD Menu does not appear on the screen or the OSD controls are inaccessible on your ViewSonic monitor, check whether the OSD Menu is locked. Try turning off the monitor, unplugging the power cord, plugging it back in, and then turning on the monitor. You can also reset the monitor to factory settings.
How do I center the screen on my ViewSonic VA2708-HDJ Monitor?
If the screen isn’t centered correctly on your ViewSonic monitor, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio and reset the monitor to factory settings.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Response Time | 4ms (GtG) |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| VESA Mount | 100 x 100 mm |
| Resolution | 1920 x 1080 (FHD) |
| Ports | HDMI 1.4, VGA |
| Viewing Angle | 178º (H) / 178º (V) |
| Color Gamut | 72% NTSC |
| Contrast Ratio | 1000:1 (static) |
