How to troubleshoot a ViewSonic VA2718-sh Monitor that has no power?
First, ensure that you have turned on the ViewSonic monitor using the power button. Next, check that the power cord is correctly and securely connected to both the monitor and the power outlet. To confirm the outlet is working, plug another electrical device into it.
What to do if ViewSonic VA2718-sh has power but no image?
If your ViewSonic monitor has power but no image, first verify that the video cable connecting the monitor to the computer is properly and securely connected. Then, adjust the brightness and contrast settings. Finally, ensure that you have selected the correct input source.
How to adjust brightness on ViewSonic VA2718-sh Monitor when the screen is too light or dark?
If the screen image on your ViewSonic monitor is too light or dark, adjust the brightness and contrast settings using the OSD Menu. If that doesn't work, try resetting the monitor to its factory settings.
How to fix a blurred screen image on a ViewSonic Monitor?
If the screen image on your ViewSonic monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
Why does my ViewSonic VA2718-sh have wrong or abnormal colors?
If your ViewSonic monitor is displaying wrong or abnormal colors, and colors like red, green, or blue are missing, check the video cable to ensure it's properly and securely connected. A loose or broken pin in the cable connector could cause an improper connection. You can also connect the monitor to another computer to test if the issue persists. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
What causes the screen image to cut in and out on a ViewSonic VA2718-sh Monitor?
If the screen image on your ViewSonic monitor cuts in and out, ensure that the correct input source is selected. Also, check the video cable connector for any bent or broken pins. Finally, make sure the video cable connecting the monitor to the computer is properly and securely connected.
Why does the screen appear yellow on my ViewSonic VA2718-sh Monitor?
If the screen on your ViewSonic monitor appears yellow, make sure the 'Blue Light Filter' is turned Off.
What to do if external device is connected, but no image appears on the ViewSonic screen?
If an external device is connected to your ViewSonic monitor but no image appears, first make sure the power is on. Then, adjust the brightness and contrast via the OSD Menu. Finally, check the connecting cable and ensure it is properly and securely connected.
What to do if OSD Menu does not appear on the ViewSonic Monitor?
If the OSD Menu does not appear or the OSD controls are inaccessible on your ViewSonic monitor, check if the OSD Menu is locked. If it is, press and hold the 3 and 5 key for 10 seconds. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
How to center the screen correctly on a ViewSonic VA2718-sh?
If the screen on your ViewSonic monitor isn’t centered correctly, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If problems continue, reset the monitor to factory settings.
Lists items included in the monitor package.
Step-by-step guide for attaching the monitor stand.
Steps for connecting the monitor to a power source.
How to tilt the monitor for optimal viewing.
Technical specifications of the monitor, including dimensions and power.
Addresses all connected requirements and statements regarding regulations.
Device complies with part 15 of FCC Rules and digital device limits.
Statement for Industry Canada compliance.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° horizontal, 178° vertical |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 1000:1 |
| Ports | HDMI, VGA |
| Response Time | 5 ms (GtG) |
To Next Page