Why are some menus not selectable in the OSD of my ViewSonic VA2718-sh Monitor?
If some menus aren’t selectable in the OSD on your ViewSonic monitor, try adjusting the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
How to troubleshoot no audio output on a ViewSonic Monitor?
If there is no audio output from your ViewSonic monitor, and you are using headphones, ensure the mini stereo jack is connected properly. Also, make sure the volume is not muted and is not set to 0. Finally, check the Audio Input setting.
What to do if control panel keys do not work on ViewSonic VA2718-sh Monitor?
If the control panel keys on your ViewSonic monitor do not work, press only one key at a time. If the problem persists, try restarting the computer.
Why are USB devices connected to my ViewSonic Monitor not working?
If USB devices connected to your ViewSonic monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port, if applicable. Note that some USB devices require a higher electric current, so try connecting the device directly to the computer.
Lists items included in the monitor package.
Step-by-step guide for attaching the monitor stand.
Steps for connecting the monitor to a power source.
How to tilt the monitor for optimal viewing.
Technical specifications of the monitor, including dimensions and power.
Addresses all connected requirements and statements regarding regulations.
Device complies with part 15 of FCC Rules and digital device limits.
Statement for Industry Canada compliance.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° horizontal, 178° vertical |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 1000:1 |
| Ports | HDMI, VGA |
| Response Time | 5 ms (GtG) |
To Next Page