To Next PageTo Next PageHow to center the screen on a ViewSonic Monitor?
To center the screen on your ViewSonic monitor, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If the issue persists, reset the monitor to factory settings.
What to do if the OSD Menu is not working on ViewSonic VA2715-2K-mhd?
If the OSD Menu does not appear or the OSD controls are inaccessible on your ViewSonic monitor, check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor again. Resetting the monitor to factory settings may also resolve this issue.
Why are some OSD menus unselectable on my ViewSonic VA2715-2K-mhd Monitor?
If some menus aren’t selectable in the OSD on your ViewSonic monitor, try adjusting the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
General| Panel type | VA |
|---|---|
| Color depth | 8 bit |
| Pixel pitch | 0.233 x 0.233 mm |
| Screen shape | Flat |
| Display diagonal | 27 \ |
| Surface hardness | 3H |
| Anti-glare screen | Yes |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | 75 Hz |
| Supported video modes | 1440p |
| NTSC coverage (typical) | 72 % |
| sRGB coverage (typical) | 104 % |
| Contrast ratio (dynamic) | 50000000:1 |
| Display number of colors | 16.7 million colors |
| Digital vertical frequency | 24 - 75 Hz |
| Digital horizontal frequency | 15 - 120 kHz |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 2560 x 1440 |
| Tilt angle range | -5 - 20 ° |
| Height adjustment | - |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| HDMI version | 1.4 |
| Headphone outputs | 1 |
| DisplayPort version | 1.2 |
| Headphone connectivity | 3.5 mm |
| RMS rated power | 4 W |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (max) | 31 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 29 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| Package depth | 128 mm |
| Package width | 688 mm |
| Package height | 448 mm |
| Package weight | 5000 g |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 205 mm |
|---|---|
| Width (with stand) | 613 mm |
| Height (with stand) | 456 mm |
| Weight (with stand) | 3600 g |
| Depth (without stand) | 40 mm |
| Height (without stand) | 361 mm |
| Weight (without stand) | 3100 g |
Details on the warranty coverage, duration, and terms for the product.
Specific warranty terms and conditions for products sold in Mexico.
Identifies and describes the input/output ports on the monitor for connectivity.
Explains the basic steps for navigating and operating the OSD menu.
Lists detailed technical specifications of the monitor, including display, input, and resolution compatibility.
