To Next PageTo Next PageWhy does my ViewSonic VA2732-MH-IN1 Monitor have wrong colors?
If any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also connect the monitor to another computer to test if the issue persists. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
Why does my ViewSonic VA2732-MH-IN1 have no power?
If your ViewSonic monitor has no power, make sure you have turned on the monitor by pressing the Power button. Ensure the power cord is properly and securely connected to both the monitor and the power outlet. To verify the outlet is working, plug another electrical device into it.
How to fix a blurred screen image on ViewSonic monitor?
To resolve a blurred screen image on your ViewSonic monitor, adjust the resolution to the correct Aspect Ratio and reset the monitor to factory settings.
How to center the screen correctly on ViewSonic VA2732-MH-IN1?
If the screen isn’t centered correctly on your ViewSonic monitor, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
How to fix ViewSonic Monitor when there is no audio output?
If there is no audio output from your ViewSonic Monitor, and you're using headphones, ensure the mini stereo jack is properly connected. Also, make sure the volume is not muted or set to 0, and check the Audio Input setting.
How to adjust screen image that is too light or dark on ViewSonic VA2732-MH-IN1?
If the screen image on your ViewSonic monitor is too light or dark, adjust the brightness and contrast settings via the OSD Menu. If that doesn't resolve the issue, try resetting the monitor to its factory settings.
How to fix a ViewSonic VA2732-MH-IN1 Monitor that has no power?
If you're experiencing no power on your ViewSonic monitor, ensure you've turned it on using the power button. Next, check that the power cord is properly and securely connected to both the monitor and the power outlet. To verify the outlet is working, plug another electrical device into it.
Why is there no image on my ViewSonic VA2732-MH-IN1 Monitor when an external device is connected?
Make sure the Power is On. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection.
How to adjust screen brightness on ViewSonic Monitor?
Adjust the brightness and contrast settings via the OSD Menu. Alternatively, you can reset the monitor to its factory settings.
What causes the screen image to cut in and out on ViewSonic Monitor?
Make sure the correct input source is selected. Check for bent or broken pins in the video cable connector. Ensure the video cable connecting the monitor to the computer is properly and securely connected.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Response Time | 4ms (GtG) |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Color Gamut | 72% NTSC |
| VESA Mount | 100 x 100 mm |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 1000:1 |
| Ports | HDMI, VGA, Audio Out |
| Viewing Angle | 178º (H) / 178º (V) |
