What to do if ViewSonic VA2735-h Monitor USB devices don't work?
If USB devices connected to your ViewSonic monitor do not work, ensure the USB cable is connected properly. Try changing to another USB port, if applicable. Note that some USB devices require a higher electric current, so connect the device directly to the computer.
What to do if ViewSonic Monitor OSD menu does not appear?
If the OSD Menu does not appear on the screen or the OSD controls are inaccessible on your ViewSonic monitor, check whether the OSD Menu is locked. You can also turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. Resetting the monitor to factory settings may also help.
What to do if some menus aren’t selectable in the ViewSonic VA2735-h OSD?
If some menus aren’t selectable in the OSD on your ViewSonic monitor, adjust the ViewMode or the input source. Resetting the monitor to factory settings may also resolve this issue.
Why is there no audio output from my ViewSonic VA2735-h?
If there is no audio output from your ViewSonic monitor, and you are using ear-/headphones, ensure the mini stereo jack is connected. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
General| Screen Size | 27 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Response Time | 5ms (GtG) |
| Refresh Rate | 75 Hz |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| VESA Mount | 100 x 100 mm |
| Contrast Ratio | 1000:1 |
| Ports | HDMI, VGA |
| Viewing Angle | 178º (H) / 178º (V) |
| Power Consumption | 25 W |
| Weight | 4.0 kg (with stand) |
To Next Page