17
• AirSetup
• In setting function, you can setup EZCastPro device’sconfigurations including output
resolution, change SSID password,setup router connection for internet surfing,
languages, EZAir modes, and turn on/off Airview/Castcode/Miracode…etc.
• Miracode: this is a special code for IP translation for better IP protection
• Castcode: Except host control, the admin can turn on Castcode for guests, they will
need to input the 4 digits Castcode shown on screen to cast their content. This will
prevent accidentally interruption by some users not in the same conference room.
To Next Page
Loading...
