To Next PageTo Next PageHow to turn on ViewSonic Monitor?
First, ensure that you have turned on the ViewSonic monitor. If it's off, simply press the Power button to switch it on. Also, verify that the power cord is correctly and securely connected to the monitor and that the power outlet is working by plugging another electrical device into it.
What to do if my ViewSonic Monitor has power but no image?
If your ViewSonic monitor has power but no image is displayed, ensure the video cable connecting the monitor to the computer is properly and securely connected. Check the video cable connector for bent or broken pins. Also, make sure the correct input source is selected and adjust the brightness and contrast settings.
Why do the colors on my ViewSonic VG2248 H2 look wrong?
If the colors on your ViewSonic monitor appear wrong or abnormal, and you notice any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You could also connect the monitor to another computer to see if the issue persists. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
Why does my ViewSonic VG2248 H2 Monitor screen image cut in and out?
If your ViewSonic monitor screen image cuts in and out, make sure the video cable connecting the monitor to the computer is properly and securely connected. Also, ensure the correct input source is selected and check for broken pins in the video cable connector.
Why no image when external device is connected to ViewSonic VG2248 H2 Monitor?
If an external device is connected to your ViewSonic monitor but no image appears, make sure the Power is On. Check the connecting cable to ensure it is properly and securely connected. Also, adjust the brightness and contrast settings.
Why does my ViewSonic VG2248 H2 screen appear yellow?
If your ViewSonic monitor screen appears yellow, make sure the “Blue Light Filter” is Off.
Why is there no audio output from my ViewSonic Monitor?
If there is no audio output from your ViewSonic monitor, and you are using headphones, make sure the mini stereo jack is properly and securely connected. Also, ensure that the volume is not muted or set to 0, and check the Audio Input setting.
What to do if the OSD Menu doesn't appear on ViewSonic VG2248 H2?
If the OSD Menu does not appear on your ViewSonic monitor, check whether the OSD Menu is locked. If it is, press and hold key 2 and 3 for 10 seconds. If that doesn't work, try turning off the monitor, unplugging the power cord, plugging it back in, and then turning on the monitor. As a last resort, reset the monitor to factory settings.
Why are USB devices not working on my ViewSonic VG2248 H2?
If USB devices connected to your ViewSonic monitor are not working, make sure the USB cable is connected properly. Try changing to a different USB port if applicable. Some USB devices require a higher electric current, so connect the device directly to the computer.
Why are some OSD menus not selectable on my ViewSonic VG2248 H2?
If some menus are not selectable in the OSD on your ViewSonic monitor, restart the computer. You can also try adjusting the ViewMode or the input source, or reset the monitor to factory settings.
General| Resolution | 1920 x 1080 (Full HD) |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | HDMI, DisplayPort, VGA, USB |
| VESA Mount Compatible | 100 x 100 mm |
| Viewing Angle | 178° (H) / 178° (V) |
| Input Ports | 1 x HDMI, 1 x DisplayPort, 1 x VGA |
| Power Consumption | 20 W |
| Screen Size | 22 inches |
