48
The following informaon is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical 
and Electronic Equipment Directive 2012/19/EU (WEEE). The mark 
indicates the requirement NOT to dispose of the equipment as unsorted 
municipal waste, but use the return and collection systems according to 
local law.
Declaraon of RoHS2 Compliance
This product has been designed and manufactured in compliance with Direcve 
2011/65/EU of the European Parliament and the Council on restricon of the use 
of certain hazardous substances in electrical and electronic equipment (RoHS2 
Direcve) and is deemed to comply with the maximum concentraon values issued 
by the European Technical Adaptaon Commiee (TAC) as shown below:
Substance Proposed Maximum 
Concentraon
Actual 
Concentraon
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
Bis(2-ethylhexyl)phthalat (DEHP) 0.1% < 0.1%
butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex 
III of the RoHS2 Direcves as noted below:
•  Mercury in cold cathode uorescent lamps and external electrode uorescent 
lamps (CCFL and EEFL) for special purposes not exceeding (per lamp): 
  Short length (500 mm): maximum 3.5 mg per lamp. 
  Medium length (> 500 mm and 1,500 mm): maximum 5 mg per lamp. 
  Long length (> 1,500 mm): maximum 13 mg per lamp.