ViewSonic VG2709-2K-MHD User Manual

52 pages

To Next Page

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in

a safe manner, as well as registering your product for future service. Warranty information contained in this User

Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at

http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.

VG2709-2K-MHD

Display

User Guide

Model No. VS19479

P/N: VG2709-2K-MHD-2

Questions and Answers:

M
Mrs. Kimberly LewisAug 29, 2025
Why is there no image on my ViewSonic Monitor when an external device is connected?
- Z
  Zachary PooleAug 30, 2025
  If you've connected an external device to your ViewSonic monitor but see no image, first, make sure the power is on. Then, adjust the brightness and contrast via the OSD Menu. Finally, check the connecting cable and ensure it is properly and securely connected, as loose or broken pins in the cable connector could cause an improper connection.
G
Glenda LarsonAug 28, 2025
What to do if my ViewSonic VG2709-2K-MHD has power but no image?
- M
  Michelle StoneAug 28, 2025
  If your ViewSonic Monitor has power but no image, ensure the video cable connecting it to your computer is properly and securely connected. You may also need to adjust the brightness and contrast settings. Lastly, verify that you've selected the correct input source.
C
Cheyenne GarciaAug 27, 2025
How to adjust brightness on ViewSonic Monitor?
- J
  Jessica McclureAug 27, 2025
  If the screen image on your ViewSonic monitor is too light or dark, adjust the brightness and contrast settings via the OSD Menu. Alternatively, you can reset the monitor to factory settings.
N
Nicole StaffordAug 27, 2025
What to do if ViewSonic Monitor has power but no image?
- T
  Timothy CookAug 27, 2025
  If your ViewSonic monitor has power but no image appears on the screen, ensure that the video cable connecting the monitor to the computer is properly and securely connected. You may also need to adjust the brightness and contrast settings. Lastly, make sure the correct input source is selected.
E
Erin HowardAug 25, 2025
How to turn on ViewSonic VG2709-2K-MHD Monitor?
- K
  Kurt RomanAug 26, 2025
  First, ensure that you have turned on the ViewSonic monitor by pressing the Power button. Also, make sure the power cord is properly and securely connected to both the monitor and the power outlet. To verify that the outlet is supplying power, plug another electrical device into it.
C
camposbarbaraAug 22, 2025
How to troubleshoot a ViewSonic VG2709-2K-MHD Monitor with no power?
- P
  Patrick JohnsonAug 23, 2025
  If your ViewSonic Monitor isn't powering on, first, ensure you've pressed the power button. Next, check that the power cord is correctly and securely connected to both the monitor and the power outlet. Finally, test the power outlet with another electrical device to confirm it's working.
C
crystal37Sep 10, 2025
What causes the screen image to cut in and out on a ViewSonic VG2709-2K-MHD?

ViewSonic VG2709-2K-MHD Specifications

General

Screen Size	27 inches
Resolution	2560 x 1440 (QHD)
Panel Type	IPS
Refresh Rate	75 Hz
Contrast Ratio	1000:1
Response Time	5ms (GtG)
Connectivity	HDMI, DisplayPort
VESA Mount Compatible	Yes