EasyManua.ls Logo

ViewSonic VG2762-4K - User Manual

ViewSonic VG2762-4K
50 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
VG2762-4K
Display
User Guide
Model No. VS18253
P/N: VG2762-4K

Table of Contents

Other manuals for ViewSonic VG2762-4K

Preview: Quick Start Guide
Quick Start Guide3 pages

Questions and Answers

  • H
    haroldaveryAug 18, 2025
    How do I adjust the brightness on my ViewSonic VG2762-4K Monitor?
    • M
      Mark JenningsAug 19, 2025
      Adjust brightness and contrast settings via the OSD Menu. If that doesn't resolve the issue, reset the monitor to factory settings.
  • J
    James AdamsAug 21, 2025
    What to do if my ViewSonic VG2762-4K Monitor has power but no image?
    • S
      Shannon HillAug 21, 2025
      First, ensure the video cable connecting the monitor to the computer is properly and securely connected. Next, adjust the brightness and contrast settings. Finally, make sure the correct input source is selected.
  • A
    Andre McknightAug 23, 2025
    Why does my ViewSonic VG2762-4K screen image cut in and out?
    • K
      Kayla RodriguezAug 23, 2025
      This issue may occur if the correct input source isn’t selected. Also, check the video cable connector for bent or broken pins. Ensure the video cable connecting the monitor to the computer is properly and securely connected.
  • H
    hunterfrederickAug 26, 2025
    Why are the colors wrong on my ViewSonic VG2762-4K Monitor?
    • D
      Dwayne WalkerAug 26, 2025
      Loose or broken pins in the cable connector could cause an improper connection. If any colors (red, green, or blue) are missing, check the video cable to make sure it is properly and securely connected. You can also connect the monitor to another computer to test if the issue persists.
  • K
    Kenneth PettyAug 27, 2025
    How to fix a blurred screen image on ViewSonic Monitor?
    • H
      Hannah NolanAug 27, 2025
      Adjust the resolution to the correct Aspect Ratio. If the image is still blurred, reset the monitor to factory settings.
  • C
    cmcclainAug 30, 2025
    What to do if external device is connected, but no image appears on ViewSonic VG2762-4K?
    • K
      Katherine GardnerAug 30, 2025
      Ensure the monitor's power is on. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected. Note that loose or broken pins in the cable connector could cause an improper connection.
  • S
    smillerSep 1, 2025
    How to fix no audio output on ViewSonic VG2762-4K Monitor?
    • S
      sarahgutierrezSep 1, 2025
      If you're using headphones, make sure the mini stereo jack is correctly connected. Also, ensure the volume isn't muted or set to 0. Finally, check the Audio Input setting.
  • H
    Heather Nolan MDSep 4, 2025
    How do I center the screen on my ViewSonic Monitor?
    • G
      Gina CoxSep 4, 2025
      Adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
  • K
    kfarrellSep 6, 2025
    Why are some OSD menus not selectable on my ViewSonic VG2762-4K Monitor?
    • R
      Rachel NealSep 6, 2025
      Adjust the ViewMode or the input source. If that doesn't work, try resetting the monitor to factory settings.
  • J
    jamesramirezSep 8, 2025
    What to do if the OSD Menu doesn't appear on my ViewSonic VG2762-4K Monitor?
    • D
      Dave JonesSep 8, 2025
      Check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.

ViewSonic VG2762-4K Specifications

General IconGeneral
Screen Size27 inches
Resolution3840 x 2160 (4K UHD)
Panel TypeIPS
Brightness350 cd/m²
Contrast Ratio1000:1
Response Time5ms (GtG)
Refresh Rate60 Hz
Aspect Ratio16:9
Color Support1.07 billion colors
PortsHDMI, DisplayPort, USB 3.0
VESA Mount CompatibleYes
Viewing Angle178º (H) / 178º (V)

Related product manuals